You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1984 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 8 posts

Tuesday, March 24th 2009, 9:54am

by OSLSprinkler

I think the better idea would be to relocate the timer/controller to an indoor location. Having it inside would prolong it's life alone. Are you able to move it into a garage or basement?

Thursday, March 19th 2009, 3:25pm

by irrigation solutions

when its cold...

you should leave it plugged in, in the off position. Not good to leave the clock off when its that cold.



www.irrigationsolutions.com

Wednesday, October 15th 2008, 4:22am

by dekarius

winterizing controller

For Outdoor mounted controller leave the power on and the dial / switch in the "Off" position. The heat from the transformer will keep the enclosure warm enough to keep condensation from forming inside the controller enclosure. The dial in the "OFF" will keep the controller from activating the solenoids in the field.

For Indoor mounted controller You may either leave the power on and the dial/switch in the "Off" position or you may remove the battery backup and unplug the transformer.

Friday, October 3rd 2008, 9:33am

by Wet_Boots

In olden days, the advice was the other way around - keep it plugged in, so that the oil in the motors never separates.

Thursday, October 2nd 2008, 10:51am

by worachj

It was suggested to me that it would be better to keep a current running though the controller during the winter months to keep condensation from forming inside the controller. I would think if condensation were a problem that it would be stated in the controller’s manual to leave it plugged in to avoid the condensation.

Thanks, I will unplug it.




Thursday, October 2nd 2008, 8:23am

by drpete

I agree. Unplug and remove the battery and reprogram in the spring. I will be shutting my system down soon and will restart in may.

Wednesday, October 1st 2008, 10:31pm

by mrfixit

Winterizing the controller.

I live in sunny Southern California but I believe I read once that you should go ahead and unplug the controller. Take out the back up battery. I believe the controller will last longer this way. Like you said, you don't care if you lose the programming.

Wednesday, October 1st 2008, 6:51pm

by worachj

Winterizing a controller

What’s the best way to winterize a controller for the long and cold Minnesota winter? Should I leave it plugged in or should I remove the battery and unplug it? I don’t care about retaining the program information and I was wondering which way was better to help prolong the life of the controller.

Thanks.