You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3547 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 8 posts

Tuesday, March 24th 2009, 3:36pm

by OSLSprinkler

I guess, I know some area's dont allow for poly pipe- PVC only. Florida I believe? I couldn't even imagine doing it all by trench, I'll take my vibratory plow and the abiltiy to make great runs hundreds of feet long while turning!! Backsaver!!!

Tuesday, March 24th 2009, 1:11pm

by debo

I would honestly consider the use of a vibratory plow. In the long run you're looking at less disturbance to the lawn and less time. Why do you want to go trencher?
Having homes in Northeast and Tx, Tx is 100% diff then new england..They love to dig trenchs downsouth..cheaper labor??? 8| ?( 8o

Tuesday, March 24th 2009, 10:31am

by OSLSprinkler

I would honestly consider the use of a vibratory plow. In the long run you're looking at less disturbance to the lawn and less time. Why do you want to go trencher?

Sunday, March 22nd 2009, 12:59pm

by hi.todd

Sorry for this comment, but you may want to ask a pro to watch the way they do it in your part of the country first. Your question is kind of scary because it shows what else you may not know. This is not rocket science, but if you could watch one go in you will be way ahead of the game. This may save you a lot of time and money.
I know you can do it. It can go in easy or hard. The first one is always hard.

I just wanted to throw this out there.


Good Luck

Sunday, March 22nd 2009, 10:04am

by irrigation solutions

need to wait!!

You want to see exactly where everything is going to be before installing a system. This is the only way to go!!

Wednesday, September 10th 2008, 7:58am

by HooKooDooKu

I agree, WAIT!!!

PVD is pretty rigid, so to splice in Tees later, you either have to have a lot of pipe exposed so that you can bend it enough to get the Tees in, or you would have to make a bunch of 4 elbow bend repairs. Either way, you would wind up doing net MORE work to install the Tees later, and the piping would be less reliable.

Tuesday, September 9th 2008, 5:33pm

by Lowvolumejeff


Much easier to do it all at once.


Tuesday, September 9th 2008, 2:05pm

by sprinkler_matt

System Install questions/tips

I need some opinions..Should I go ahead and trench and install pvc and then go back and cut in Tees and install heads or should I wait until the heads and tee's arrive and do it as I go. I am using a trencher not a pipe puller/Vibratory plow.