You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2214 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Sunday, August 3rd 2008, 8:27pm

by pulpwoodpcP (Guest)

The only way I can turn the zone off is the shut off the water. I have a Hunter 600i controller and hunter srv valve. How do I get the zone to shut off.
Clean the valve it now shuts off thanks

Saturday, August 2nd 2008, 9:54pm

by Lowvolumejeff

Debrie

I agree. I am amazed that small pebbles and sand gets into our systems and cause valve problems. So common in areas with new consruction, that I place brass strainers on all new installations.

Frustrating problem, Hope you get it fixed.

Or, if you don't find anything inside the valve, rplacing the diaphram and solenoid has also worked for me. BUT, try the Mr.FixIt suggestion first.

Jeff

Saturday, August 2nd 2008, 9:50pm

by mrfixit

wont shut off

If disconnecting the wire from that zone doesn't shut off the valve then the problem is at the valve. Take the top half of the valve off and see what's going on inside. Look for debris and see if there's something wrong with the diaphragm.

Saturday, August 2nd 2008, 7:49pm

by Pulpwood (Guest)

Zone stay on and Controller is off

The only way I can turn the zone off is the shut off the water. I have a Hunter 600i controller and hunter srv valve. How do I get the zone to shut off.