You are not logged in.

  • Login
  • Register

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1923 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Thursday, September 4th 2008, 9:29am

by sully (Guest)

RE: RE: water pumps

Quoted from "sully"

My thought would be to use a siphon (if your garden is down hill) to get the water to another reservoir then use your pool pump or sump pump to elevate the water in to a water tower. This would allow gravity to do most of the work for you.

Quoted from "sully"


Quoted from "bikericeman"

The drums are closed,not open . I have piping from one drum to the other which the water passes and there is a tight seal. I have a manifold pipe from drum to drum with valves to open and close each one. I've been using a sump pump in another drum as the pumping station, but the sump just isn't strong enough for the distant. If you have a idea or though on a better pump other than a old cheap pool pump I would like to hear of them. This will only be used a few times a summer , just had another idea maybe I run lines to the water closets also,that will save on water down the drain.

Thanks for your concern about the barrels becoming mosquito-breeding pools.

Thursday, September 4th 2008, 9:20am

by sully (Guest)

RE: water pumps

Quoted from "bikericeman"

The drums are closed,not open . I have piping from one drum to the other which the water passes and there is a tight seal. I have a manifold pipe from drum to drum with valves to open and close each one. I've been using a sump pump in another drum as the pumping station, but the sump just isn't strong enough for the distant. If you have a idea or though on a better pump other than a old cheap pool pump I would like to hear of them. This will only be used a few times a summer , just had another idea maybe I run lines to the water closets also,that will save on water down the drain.

Thanks for your concern about the barrels becoming mosquito-breeding pools.

Friday, July 25th 2008, 11:17pm

by bikericeman

water pumps

The drums are closed,not open . I have piping from one drum to the other which the water passes and there is a tight seal. I have a manifold pipe from drum to drum with valves to open and close each one. I've been using a sump pump in another drum as the pumping station, but the sump just isn't strong enough for the distant. If you have a idea or though on a better pump other than a old cheap pool pump I would like to hear of them. This will only be used a few times a summer , just had another idea maybe I run lines to the water closets also,that will save on water down the drain.

Thanks for your concern about the barrels becoming mosquito-breeding pools.

Sunday, July 20th 2008, 12:09pm

by Wet_Boots

How are you preventing these barrels from becoming mosquito-breeding pools?

Sunday, July 20th 2008, 12:22am

by bikericeman

Water pumps

I've installed 6- 55 gallons barrels to catch rain water off my roof . I need it to water my garden instead of city water. I was thinking of using a old pool pump to water the garden that's almost 100 feet from the house. Does anybody know of a better pump that's 110 and and has a 1.25 inlet to a 3/4 outlet.

bikericeman