You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3629 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, July 12th 2008, 1:37pm

by mrfixit


Hi Hazel, so far you've done everything right it sounds like. That switch is supposed to turn on and off the individual valves. You want them in the off position during normal operation with the timer. If you want to turn one on manually just flip the switch. Every once in a while I'll run across a switch that's been turned on somehow by accident. So keep that in mind if one of the sections is on when it's not supposed to be.

Good luck!

Saturday, July 12th 2008, 8:02am

by Hazelwood

3/4" Orbit Sprinkler Valves

Good Morning, I have replaced three of the sprinkler valves with new Orbit 3/4" valves in the back yard. I do not have the valves hooked up to the timer, yet. I turn the water on and when I flip the switch on to the valve it turns on the sprinklers to that area. Until I flip the switch to the off position the spriklers stay on. What am I doing wrong?

Thank You