You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2125 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Saturday, June 28th 2008, 7:55pm

by Wet_Boots

Same valve - Irritrol (Toro) bought the company that had bought Richdel

Saturday, June 28th 2008, 5:16pm

by cRay S (Guest)

Richdale control valve

I have a Richdale 2400T solenoid control valve that I cannot shut off. I had several that leaked and a simple cleaning cured all but one. What is strange is this valve was not leaking before I cleaned it, now after cleaning I cannot get it to shut off. I would like to replace the diaphram and valve parts but cannot find them listed here. Are there replacement diaphram and valve gasket parts made by another manufacurer. I have looked and there is an Irritrol 2400 valve that looks very similar to my Richdale. Are the parts interchangeable?

Monday, April 28th 2008, 8:46pm

by hi.todd

If I am not mistaken Toro is irritrol now. You may be able to find it under the irritrol name. It may be time to replace the valve with a new one. Preference and availability of parts are important as you are finding out. You may try the rainbird DV100 if it is a 1" valve.
Good Luck

Dan

:thumbsup:

Monday, April 28th 2008, 7:03pm

by siwilson (Guest)

Valve diaphragm replacement

I have Toro pro flo valves in my system and a couple of them won't shut off so I was going to replace the diaphragms. They don't seem to be too easy to find, no local dealers anymore and I am confused about which diaphragm I need. I have 2 part numbers 89-0993 & 89-9861 and I am not sure which one to get. Does it matter?

Thanks for your help,

Scott