You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3645 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Thursday, June 26th 2008, 8:19am

by Wet_Boots

If it's an exterior model, with wires coming from a 'pipe nipple' then you connect a junction box to the nipple. Your power cord leads into the junction box, and you use wire nuts to make the connection. Although this seems like overkill, it complies with electrical codes, which are concerned with the volume of an enclosure where connections are made.

Thursday, June 26th 2008, 7:40am

by Bill Mennonna

Installation Question

I recently purchased a Toro controller, TCC-P12 and plan to install my new system soon. I’ve worked with Toro products and controller many years ago and recall that the controllers used a transformer. This model did not come with a transformer, and I did not see if it was built in. Can this be wired using a pig tail cord? I plan to install the controller inside, next to an existing outlet.