You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2319 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, June 25th 2008, 12:59pm

by mrfixit

Wont shut off

I installed 6 of these at one house on old valve bodies. One of the six wouldn't shut off all the way. I could hear the water seeping through it. Here's what worked for me. Turning the whole unit clockwise is similar to using a flow control. You can actually shut off the water flow completley. I had to turn it way down before the seeping would stop. If I'd turned it anymore the valve wouldn't have functioned. I wasn't sure at all this would be a long term fix. It's been many months now and it's still working. -- You also might have debris between the seat washer and the seat. Maybe you should take the unit off and flush the line. Look at the seat washer for pits and the seat to see if it's smooth. You didn't per chance install it on a 1" valve body with a 3/4" seat washer did you?. You do have this installed on a "brass" valve body don't you? If all else fails I'd take it back and get a new one.

Good luck!

Wednesday, June 25th 2008, 11:30am

by Beav882

sprinkler heads leaking

I bought a DIG 710-011 single station controler with acutator and installed it on the valve and it works great but it isn't shutting off the water all the way. I adjusted the tightness but it still leaks. I took it off to look for dirt and found it to be clean. It just does not shut off the water completely. What do I do?