You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3688 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Monday, June 16th 2008, 6:05am

by Wet_Boots

Property size? How much lawn are you watering?

Sunday, June 15th 2008, 12:21pm

by hi.todd

Before we have to spend money and go negative. Check your water meter and make sure it is open all the way. If there are any valves that are in the line at the entry to your house supply or entry to the house supply make sure they are open all the way. You can do this by opening a hose bib on the side of the house and closing the water meter. Then as you open it watch and listen to the spray so that you can be sure it is open all the way. This is the best way to do it if you don't have a pressure guage and don't want to buy one. There maybe other good ideas out there. this is a good start before extra design measures are needed.

Good Luck

Sunday, June 15th 2008, 11:25am

by junior999

1 min 14 fill 5 gall bucket........32 to 35 psi...

what can i do to install this system????????

will a booster pump help the gpm's?