You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2131 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Thursday, June 19th 2008, 4:04pm

by Auto-Rain_Chick

Dura Cooperation has a Dura manifold that is designed with O-Rings that allows you to hand tighten them on to the valve without any leakage or teflon tape.

If by chance you have used a tool that has tighten down to tight it has a chance to compromise the features of the manifold system.

As Shown in this Picture:


Sunday, June 15th 2008, 8:57am

by Wet_Boots

Got a picture? A few select manifolds used O-rings for sealing, against male-threaded valves.

Saturday, June 14th 2008, 6:12pm

by Rick (Guest)

using teflon tape on manifold

I purchase a manifold with 3 valves. There was no teflon tape where the valve screws onto the manifold. Do i need to take it apart and put tape on the valve. Thanks rick