You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3685 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Saturday, June 14th 2008, 11:35am

by tdunc (Guest)

AHA! I see! Thank you both!

Friday, June 13th 2008, 12:44pm

by drpete

Sorry i dint see your post till now. the drain you atre referring to is designed to be used where you slip te barbed end into your poly pipe and clamp it then screw your last rotor onto the threads so the drain is facing down.

i use them and they work good.

Wednesday, June 11th 2008, 11:54pm

by mrfixit


Here I looked it up for you. We don't use drains where I live. I've never seen one installed.

Wednesday, June 11th 2008, 8:59pm

by Wet_Boots

Maybe no one here is using them. Ask the manufacturer, maybe.

Wednesday, June 11th 2008, 7:29pm

by tdunc (Guest)

End of line drain

I posted this in another area a couple days ago and received no replies yet ...

How is the HP1500 end-of-line drain installed? I have 1/2" poly tubing, clamped end for now - until I install the drain. The drain has two connections - one is barbed and the other is threaded. Do I connect the barbed end into my tubing and cap off the threaded opening? Does it matter how the drain is oriented (wicking pad up or down)?