You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3882 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, April 27th 2008, 6:34am

by Wet_Boots

Slide the 'tab' to OFF, and the valve should be ready for normal automatic operation.

Saturday, April 26th 2008, 11:35pm

by bwrynn

Irritrol 2400 Setup

I have a system with Irritrol 2400 valves. What position does that
little valve tab that says ON/OFF have to be rotated for automatic
operation? Dont laugh. Does the ON/OFF direction refer to manual or
automatic operation?

Should the "cap" above the tab part be rotated independently. The
small lawn company I have blew air threw the system last year to
winterize and left the valves out of normal position. The owner who
knew how to set up the sprinklers sold the company to the workers who
dont much about the valves, etc. I just want to get everything into
normal automatic operating position. Thanks.

(Also not sure if I am creating a new post or updating an old one!)